Introduction
Solar power is becoming an essential part of providing clean and sustainable electricity. Whether it be residential rooftops, commercial buildings, industrial or larger solar farms, photovoltaic (PV) systems are used to generate electrical energy from sunshine. Whilst the solar panels themselves grab most of the attention, the cables are a very important part of the solar installation.
Knowing the specifications of solar cables will help solar installers, electrical engineers, project developers, contractors and procurement teams find cables that will work with the voltage and current requirements of your system and will be appropriate for your installation.
Solar cables will have been specifically designed for certain uses. They may need to be UV resistant, withstand changes in temperature and humidity and be able to be outdoors for long periods of time. Using the wrong cable can cause issues such as degraded insulation, high voltage drop, overheating and early failure.
In this article we will give you an overview of what key specifications you should look at for solar cables, what types of cable are used, what standards you should look out for and factors to take into consideration when choosing solar cables.
Solar cables are used to connect together various parts of a solar power system. They transport electrical energy produced by solar PV modules into other parts of the system such as stringing, combiners, inverters and electrical systems.
1. What Are Solar Cables?
Depending on the design of your solar PV system, you may have both DC and AC circuits. Each will require the correct cable type.
Solar DC cables are often used to connect solar PV modules and strings to the DC side of the inverter. Power cables are used to carry the alternating current from the inverter to the electrical systems.
These are not interchangeable. The cables must have the correct voltage rating, insulation, cable construction and standard.
2. Key Solar Cable Specifications
When choosing solar cables, there are various specifications you should review:
2.1 Voltage Rating
This tells you what voltage the cable can withstand.
Solar PV systems can have high voltages running through them. This is especially true for larger commercial/utility-scale installations. To ensure your cable is suitable, you want to make sure it has the correct rating for the highest voltage your system will have.
The highest voltage your PV strings can have will vary depending on how many modules are connected in series and their voltage characteristics based on module temperature.
To ensure you have the correct cable, you can calculate the highest voltage your system is likely to have. You can then select a cable with the correct rating. You should always confirm the DC rating of the cable and the standard it meets.
2.2 Conductor Material
Most solar cables will have copper conductors, as they have good electrical conduction properties.
The conductor is what will carry current between the solar modules and other electrical components. The conductor will have resistance and affect the power loss throughout the cable.
The conductor should be suitable for its application. If it has a stranded conductor, it should meet the requirements for the strand type and flexibility.
You should always check the product datasheet to confirm the conductor.
One of the key specifications of any solar cable is the conductor size. This will affect the cables’ ability to carry current, resistance, voltage drop and thermal properties.
2.3 Conductor Size
Cable sizes are usually measured in mm². The correct size will depend on several factors:
- The current is expected to run through the cable.
- Length of cable and allowable voltage drop.
- Ambient temperatures and solar exposure.
- Installation type.
- If the cable is grouped with other current-carrying cables.
- Electrical regulations.
If the cable is too small for the application, it can cause high voltage drops and overheating. However, if the cable is too large, this could cause unnecessary costs to your project.
You should calculate the correct conductor size of the cable for your installation.
2.4 Insulation and Sheathing
Solar cables may use specialist insulation and sheathing materials.
This will insulate the conductor and provide extra protection to the cable.
Materials used may need to be UV resistant, waterproof, resistant to temperature changes and have good environmental durability.
If appropriate materials and cable constructions are used, then the cable will perform electrically over its intended lifetime. The exact properties of the cable will vary depending on the product and testing.
A datasheet provided by the manufacturer should be viewed to find out what insulation material is used. What sheathing is used, the temperature rating and what environmental properties are guaranteed.
2.5 Temperature Rating
Solar cables will often be exposed to high temperatures. This could be due to sunlight, hot roof temperatures and general heat around electrical components.
The cable will have a temperature rating depending on how it has been designed and what specification it meets. This does not mean that the conductor will be able to handle the highest temperature that the cable can be installed in.
The temperature can have an effect on the resistance of the conductor and the current carrying capacity. The installation conditions and how many cables are being grouped together may mean that adjustments need to be made.
Make sure the cable you choose has a temperature rating and that the installation conditions do not exceed those set out by the manufacturer.
2.6 UV and Weather Proof
Many solar installations will be outside, and so the cables may be exposed to sunlight, rain, water, dust and changing weather conditions.
The cable will need to be suitable for outside use. If the cable is going to be exposed to UV light, then it should be specifically designed for this.
Not all electrical cables are designed for long periods of direct sunlight. If the cable is for inside wiring, then it should not be assumed it will be suitable for solar outside use.
Follow the recommended installation guidelines such as cable routing, support, bend radius and protection to minimise mechanical damage and early deterioration.
2.7 Flexibility and Mechanical Properties
Solar installations often require cabling to be routed around module frames, fixing frames and electrical enclosures. A suitable flexible cable will make installation easier and reduce stress on the conductor and connectors. The cable will need to have good mechanical properties.
This can be important for:
Minimum bend radius and abrasion resistance where required Suitable cable supports and routing Cable protection from sharp edges and squashing. Cable compatibility with connectors and enclosures.
A cable with suitable flexibility will not be the only consideration. The whole cable construction and technical specification must meet the requirements of the application.
3. Cable Types
3.1 DC Solar PV Cables
These cables are used to connect photovoltaic modules and strings together.
They are most commonly used between PV modules, string wiring, PV arrays and inverters/combiner boxes.
These cables would need to have the correct DC voltage rating and environmental properties to suit your installation. Sizes should also be chosen based on current, length of cable, voltage drop and design requirements.
3.2 AC Cables
The inverter changes DC electricity produced by the solar panels to AC electricity ready for use in electrical appliances or to be fed into the grid.
Appropriate AC cables are used from the AC output of the inverter to connect to distribution boards, transformers or any other electrical equipment.
These cables will need to have the correct ratings to work with the AC system they are being used in. It is important to ensure that these cables aren’t just taking from the DC PV cable range. They should have the correct current, voltage, environmental and installation requirements.
3.3 Module Interconnect Cables
Module interconnect cables are used to connect PV modules together to create strings. These are often supplied as part of the module package or can be used with compatible connectors.
The cables would need to have the correct electrical ratings, conductor size, insulation, compatible connectors and environmental properties to suit your PV system design.
It is important to use compatible components; if there is a mismatch between connectors or poor quality terminations, there can be resistance issues.
3.4 Main DC Cables
Main DC cables are used to distribute the electricity generated from either PV strings or the array collection points to inverter input connections or other DC equipment.
These cables can be longer than those connecting the modules; therefore, conductor sizes and voltage drop calculations can become very important.
The design has to take into account the highest voltage, current, method of installation, environment and protection requirements.
3.5 Earthing & Bonding Conductors
Earthing and bonding conductors will be used for protection.
These will help to provide the protection connections needed for the design and regulations.
Care should be taken to ensure the correct type and size of conductor is chosen. This should not just be based on the size of the solar power cable nearby. The correct size should be based on the relevant electrical design requirements.
4. Standards & Certifications
Standards can specify the materials, performance, testing & suitability requirements for types of cable.
Solar PV cables may have many standards such as IEC 62930 & EN 50618 depending on the type, market & project.
It is important you confirm the correct standard is applicable to the cable and ensure that it includes the correct conformity documentation.
Please check the following:
- Product Standard (Specified on Datasheet)
- Rated Voltage & Temperature
- Conductor Size & Type
- Correct Test Reports & Conformity Documentation
- Suitable for use in your DC/AC application
- Any additional requirements from your project.
Do not assume just because they specify a standard on their literature that it is applicable to the correct cable model. Please make sure the documentation is relevant to the exact cable you are receiving.
5. Choosing the correct cable size
There are many factors which need to be taken into account when choosing the correct cable size.
Maximum Voltage in your circuit
Calculate the maximum voltage that will be present in the PV string. This will depend on the module specifcations, string design and relevant temperatures.
Design Current
Using the PV module and system specifications, plus relevant design rules calculate the current the cable will need to carry.
Voltage Drop
Voltage is lost through the resistance of the cable. This voltage drop can be increased by longer cable runs and higher currents.
Corrections for Installation
Depending on the ambient temperature, number of cables grouped together, how it is routed and what conditions it is exposed to, the cable may need to have its current reduced.
Verification of Whole Installation
Ensure that all the cables, connections, protection devices and equipment are all compatible with the final design.
The final cable size should be chosen or verified by a qualified solar or electrical professional. Cable sizing charts should not be used as they are universal. The cable size should be calculated for your specific project.
6) Common Mistakes When Choosing Solar Cables
To ensure your solar installation works optimally you should avoid choosing the wrong type of cables. Below are some common mistakes:
Using indoor cables outdoors – May mean that they do not have environmental properties.
Voltage drop – Long lengths of cable without the right sized conductor can cause unnecessary voltage drop.
Low quality cables – Cheap cables do not necessarily meet the required technical specs.
Inappropriate connectors – The connector should be appropriate for the cable, equipment and one another as per the manufacturers guidelines.
Incorrect environmental factors considered – The temperature on your roof, cable bundling and installation methods can affect the current rating of the cable.
Do not refer to documentation – Check all the ratings, standards and test information is correct.
Avoiding these mistakes will help the installer make more informed decisions when purchasing and designing.
7. Why quality matters when manufacturing solar cable
Solar systems will be expected to last for a number of years so it is essential that the cable is suitable.
By having consistent manufacture, suitable materials, controlled processes, and relevant testing we can ensure the cable is suitable to meet the specifications.
When sourcing a cable your procurement team should look at having clear technical data sheets. They should also be able to traceable, have relevant test documents, and clear communication from the supplier.
You should also make sure that the cable is meeting the approved specification. Even if two cables look identical they could be using different conductor sizes, different insulating materials, and voltage ratings.
By ensuring you are using a cable with proven specifications means you can make more informed decisions when sourcing.
8. Solar Cable Solutions
When choosing your cables you need to consider what application is being used, system voltage, conductor size, cable insulation, conditions that the cable will be exposed too and which standard(s) they need to comply with.
Flashtronics Technologies provides solutions for wire and cable applications within industrial and electrical industries.
Pass this information onto your cable supplier so they can ensure their products are suitable for your application. Confirm the products are available and have the correct technical specification.
View the wire and cable range at Flashtronics Technologies and contact them to discuss your requirements.
FAQs
What are solar cables?
PV cables can be used to connect modules together and other parts of the system.
What is the difference between a DC PV cable and an AC cable?
DC PV cables will be used within a DC circuit.
AC cables are used to carry alternating current from the inverter to other electrical components or into the grid. Both should be suitable for their use.
What material are PV cables conductor made from?
Copper is common due to its good electrical conductivity. It is important to confirm what material the conductor of the cable is made from and if it is suitable for the application from the data sheet.
Why would UV resistance be important?
PV cables installed outside may be exposed to sunlight for long periods of time. Ensuring the cable has suitable UV resistance will help ensure that the materials will be suitable for the exposure.
What standards should I look out for?
IEC 62930 and EN 50618 can be examples of standards that apply to some PV cable products. It is always important to confirm what standard applies to your product.
How do you choose the right cable size?
The cable size will depend on several factors such as the maximum voltage of the system, the current design, length of cable, voltage drop, temperature and installation. It is always best to confirm the cable has been chosen correctly by a qualified professional.
Conclusion
Having an understanding of solar cable specifications will help you to choose the correct cables for your residential, commercial, industrial and utility solar power system.
Factors such as voltage rating, conductor size, insulation, temperature rating, UV suitability, cable standards and different cable types used in various parts of your PV installation (such as DC solar cables, AC power cables and earth protection) will affect the type of cable you choose.
By checking technical data sheets, ensuring you have the correct documentation on the product, correctly calculating the cable sizes and using professional installation techniques businesses can make more informed decisions.
Wire and cable solutions can be provided by Flashtronics Technologies . Find out more by visiting our website.

